Horizontal Filter/Separators
Aviation Filters/Separators
HV-XXXX225 Series
Horizontal Filter/Seperator Vessels for Fixed Installations at Military Facilities
Easier Cartridge Change
The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.
Effluent Cleanliness
A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.
Tested and Approved Vessels
Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This specifi cation is similar to API/IP 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.
Specifications
Teflon® is a registered trademark of E.I. du Pont de Nemours & Co., Inc.
Horizontal Filter/Seperator Vessels for Fixed Installations at Military Facilities
Easier Cartridge Change
The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.
Effluent Cleanliness
A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.
Tested and Approved Vessels
Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This specifi cation is similar to API/IP 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.
Specifications
- 225 psi ASME Code Construction
- RF Flanged Connections
- Swing Bolted Closure
- Buna-N O-Ring Cover Seal
- Mil-PRF-4556 Epoxy Coated Interior, Primed Exterior
Teflon® is a registered trademark of E.I. du Pont de Nemours & Co., Inc.
