Search Catalog
All Categories > Aviation Filters/Separators > Horizontal Filter/Separators > Item # HV-2838225  

Item # HV-2838225, Horizontal Filter/Separators

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites

HV-XXXX225 Series
Horizontal Filter/Seperator Vessels for Fixed Installations at Military Facilities

Easier Cartridge Change
The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.

Effluent Cleanliness
A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.

Tested and Approved Vessels
Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This specifi cation is similar to API/IP 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.

  • 225 psi ASME Code Construction
  • RF Flanged Connections
  • Swing Bolted Closure
  • Buna-N O-Ring Cover Seal
  • Mil-PRF-4556 Epoxy Coated Interior, Primed Exterior

Teflon® is a registered trademark of E.I. du Pont de Nemours & Co., Inc.

Specifications  · Coalescer Elements  · Separator Elements  · Standard Accessories


Flow Rate1

600 gpm


140 gal


1175 lbs

Dimension A

55 3/4 in

Dimension B

34 1/4 in

Dimension C

16 3/4 in

Dimension D

62 1/2 in

Dimension E

15 in

Dimension F

6 in

Dimension G

22 in

Dimension H

22 in

Dimension J

28 in

Dimension K

85 in

Dimension L

27 in

Cover Shape


Flange Type

Raised Face Flange


ANSI B16-5, Class 150

Closure Type

Swing Bolted
1 For Jet A, Jet A-1, Jet B, JP-4, JP-5, JP-8

Coalescer Elements

Coalescer Element


Coalescer Elements (Qty)


Separator Elements

Separator Elements


Separator Elements (Qty)


Standard Accessories
In compliance with USAF Specification 15880, the following accessories are included for safe, effective operation:
  • Automatic Air Vent with Check Valve
  • Pressure Relief Valve (Does not meet Mil-V-11201)
  • Direct Reading Differential Pressure Gauge
  • Sampling Probes with Ball Valves
  • Stainless Steel Ball Valve Manual Drain
  • Sight Gauge with Ball Checks and Colored Density Sensitive Ball
  • ASME Code Stamp
  • API Nameplate

Optional Accessories
  • Interface Control
  • Water Slug Control Valve

Site created by ThomasNet Web Solutions