Close
Skip To Content
mail_outline Email phone Phone: 630.858.9030 Contact Us

Catalog

Request Information
  • whitnoz

    Whittaker Controls F116/F117/F145 Aircraft Nozzles

    (3)


    Please select a part number below for further information.

  • opw295sa

    OPW 295SA, 295SAC & 295SAJ Aircraft Nozzles

    (9)


    Features

    • Aluminum body - lighter weight, easier to maneuver.
    • Dual poppets - easy-to-open nozzle against high inlet pressures.
    • Color-coded composite lever guards - helps distinguish between AVGAS and Jet A. Easily replaced in lever guard kit.
    • Right angle design - provides larger lever area for better grip and easier control.
    • Vinyl-coated lever - insulates fingers against cold.
    • 100 mesh strainer - prevents foreign matter from entering fuel tank; easy to remove and clean.
    • Dust cap - keeps spout free from dirt and stops fuel drippage when connected.
    • Adjustable dash pot - permits adjusting the main poppet closure rate over a wide range of flows to overcome line shock with minimum afterflow.
    • Easily replaced spout - the spout is easily threaded into the body. Replacement spouts are readily available from OPW.
    • Design working pressure - OPW nozzles are designed to work at 50 PSI (3.45 bar) maximum pressure.
    • Built-in swivel - eliminates twisting and kinking of the hose. This swivel is hard-coated aluminum and has full bearing surfaces.
    • NPT female threads at inlet end of 295SA - accepts all 1", 1 1/4", or 1 1/2" male connections.
    • NPT female threads at inlet end of 295SAJ - accepts all 1 1/2" male connections.
    • Unique jet aircraft spout design of 295SAJ - to help prevent inadvertent fueling of piston engine aircraft with turbine fuel.
    • Ground wire assembly - included on all aviation nozzles.
    Materials
    • Body: Cast aluminum
    • Main Stem: Stainless Steel
    • Stem Seal: Buna-N O-ring
    • Disc: Viton®
    • Spout: Aluminum

  • Aircraft Nozzel


    Whittaker/Thiem - underwing

    OPW - overwing

    Filtration Corporation of America offers a complete nozzle rebuilding service. As a certified distributor for both Whittaker and OPW nozzles, we are fully qualified to refurbish and overhaul your nozzle to perform to the original manufacturer's specifications.

    Rebuild service includes (but not limited to):

    • Disassembly, cleaning, and inspection of all parts
    • Repair or replace shell grips
    • Repair body (if needed)
    • Straighten or replace bent, worn, or broken handles
    • Replace nose seal (if needed)
    • Replace o-ring seals
    • Check all clearances
    • Pressure test for leaks in open and closed position