Filtration Corporation of America
Filtration Corporation of America
1118 Hill Avenue
Glen Ellyn, IL 60137
Tel: 630.858.9030
Fax: 630.858.0953
Email: info@filtrationcorp.com
Website: www.filtrationcorp.com
Print Back
HV-XXXX225 Series
Horizontal Filter/Seperator Vessels for Fixed Installations at Military Facilities

Easier Cartridge Change
The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.

Effluent Cleanliness
A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.

Tested and Approved Vessels
Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This specifi cation is similar to API/IP 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.

Specifications
  • 225 psi ASME Code Construction
  • RF Flanged Connections
  • Swing Bolted Closure
  • Buna-N O-Ring Cover Seal
  • Mil-PRF-4556 Epoxy Coated Interior, Primed Exterior

Teflon® is a registered trademark of E.I. du Pont de Nemours & Co., Inc.
Horizontal-Filter
H Filter Dim Drwng
Unit of Measure
Items Horizontal-Filter
HV-2238225
Horizontal Filter/Separators 		Horizontal-Filter
HV-2838225
Horizontal Filter/Separators 		Horizontal-Filter
HV-3456225
Horizontal Filter/Separators
Accessories N/A API Nameplate ASME Code Stamp Automatic Air Vent with Check Valve Direct Reading Differential Pressure Gauge Interface Control Pressure Relief Valve Sampling Probes with Ball Valves Sight Gauge with Ball Checks and Colored Density Sensitive Ball Stainless Steel Ball Valve Manual Drain Water Slug Control Valve
Flow Rate1 N/A 300 gpm N/A 600 gpm N/A 1200 gpm
Coalescer Element N/A I-638MMTB N/A I-638MMTB N/A I-656MMTB
Coalescer Elements (Qty) N/A 4 N/A 7 N/A 10
Separator Elements N/A SO-430V N/A SO-636V N/A SO-648V
Separator Elements (Qty) N/A 2 N/A 2 N/A 3
Volume N/A 85 gal N/A 140 gal N/A 335 gal
Weight N/A 1000 lbs N/A 1175 lbs N/A 2100 lbs
Dimension A N/A 53 in N/A 55 3/4 in N/A 65 3/8 in
Dimension B N/A 38 1/2 in N/A 34 1/4 in N/A 37 3/4 in
Dimension C N/A 10 in N/A 16 3/4 in N/A 22 in
Dimension D N/A 59 1/2 in N/A 62 1/2 in N/A 83 1/2 in
Dimension E N/A 14 1/2 in N/A 15 in N/A 19 7/16 in
Dimension F N/A 4 in N/A 6 in N/A 8 in
Dimension G N/A 16 in N/A 22 in N/A 28 in
Dimension H N/A 30 in N/A 22 in N/A 38 1/4 in
Dimension J N/A 22 in N/A 28 in N/A 34 in
Dimension K N/A 93 1/2 in N/A 85 in N/A 94 1/2 in
Dimension L N/A 29 in N/A 27 in N/A 38 1/2 in
Cover Shape N/A Flat N/A Dome N/A Dome
Flange Type N/A Raised Face Flange
Standard N/A ANSI B16-5, Class 150
Closure Type N/A Swing Bolted
Standard Accessories N/A In compliance with USAF Specification 15880, the following accessories are included for safe, effective operation:
  • Automatic Air Vent with Check Valve
  • Pressure Relief Valve (Does not meet Mil-V-11201)
  • Direct Reading Differential Pressure Gauge
  • Sampling Probes with Ball Valves
  • Stainless Steel Ball Valve Manual Drain
  • Sight Gauge with Ball Checks and Colored Density Sensitive Ball
  • ASME Code Stamp
  • API Nameplate

Optional Accessories
  • Interface Control
  • Water Slug Control Valve
  • 1 For Jet A, Jet A-1, Jet B, JP-4, JP-5, JP-8