Close
Skip To Content

Catalog

Type E hose is electrically conducting hose incorporating one metallic conducting helical support bonded to the couplings and a conductive cover. The electrical resistance is less than 100 ohms/meter. This type of hose may be used as a riser hose in a hydrant servicer, refuelers to supply fuel to an elevating platform or as a suction hose between a refueler and a trailer.
Unit of Measure

Specifications

Brands

N/A PEAR®

Inside Diameter (Fraction)

N/A 2-1/2 in

Inside Diameter (Decimal)

N/A 2.50 in

Outside Diameter

N/A 3.11 in

Working Pressure

N/A 300 psi

Outer Diameter (OD) (Drum/Reel)

N/A 22 in

Weight

N/A 1.88 lb/ft

Standard

N/A American Petroleum Institute (API) 1532

Features

Features

N/A PEAR® hose uses contitech areopal hose exclusively for aircraft refueling.

PEAR® Hose has API hose from 3/4" to 4" diameter. All meeting API 1529/ 2005, 7th edition, Grade 2, TYPE C, CT or E. Hose lengths and couplings/fittings per customer request. Hose and couplings/fittings marked/labeled in accordance with API 1529. A test certificate is provided for each coupled hose. CT Hose also complies too MIL-DTL-6615G specification.

Adapters for Aviation Hose Assemblies

Adapters for Aviation Hose Assemblies

N/A Male and Female NPT for Cam and Groove (mil spec available), TTMA Flange, and 150 lb Flange, Aluminum, Brass, and Stainless.

Testing

Testing

N/A All aviation hose assemblies are 100% hydrostatic tested to 600 psi and checked for electrical continuity.

Each and every hose receives a unique serial number and test certificate.

Note

Note

N/A All of the above information is for general reference only and is subject to change without notice.