Filtration Corporation of America
Filtration Corporation of America
1118 Hill Avenue
Glen Ellyn, IL 60137
Tel: 630.858.9030
Fax: 630.858.0953
Email: info@filtrationcorp.com
Website: www.filtrationcorp.com
Print Back
HV-XXXX225 Series
Horizontal Filter/Seperator Vessels for Fixed Installations at Military Facilities

Easier Cartridge Change
The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.

Effluent Cleanliness
A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.

Tested and Approved Vessels
Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This specifi cation is similar to API/IP 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.

Specifications
  • 225 psi ASME Code Construction
  • RF Flanged Connections
  • Swing Bolted Closure
  • Buna-N O-Ring Cover Seal
  • Mil-PRF-4556 Epoxy Coated Interior, Primed Exterior

Teflon® is a registered trademark of E.I. du Pont de Nemours & Co., Inc.
Unit of Measure

Specifications

Flow Rate1 N/A 300 gpm

Volume

 N/A 85 gal

Weight

 N/A 1000 lbs

Dimension A

 N/A 53 in

Dimension B

 N/A 38 1/2 in

Dimension C

 N/A 10 in

Dimension D

 N/A 59 1/2 in

Dimension E

 N/A 14 1/2 in

Dimension F

 N/A 4 in

Dimension G

 N/A 16 in

Dimension H

 N/A 30 in

Dimension J

 N/A 22 in

Dimension K

 N/A 93 1/2 in

Dimension L

 N/A 29 in

Cover Shape

 N/A Flat

Flange Type

 N/A Raised Face Flange

Standard

 N/A ANSI B16-5, Class 150

Closure Type

 N/A Swing Bolted

Coalescer Elements

Coalescer Element

 N/A I-638MMTB

Coalescer Elements (Qty)

 N/A 4

Separator Elements

Separator Elements

 N/A SO-430V

Separator Elements (Qty)

 N/A 2

Standard Accessories

N/A In compliance with USAF Specification 15880, the following accessories are included for safe, effective operation:

  • Automatic Air Vent with Check Valve
  • Pressure Relief Valve (Does not meet Mil-V-11201)
  • Direct Reading Differential Pressure Gauge
  • Sampling Probes with Ball Valves
  • Stainless Steel Ball Valve Manual Drain
  • Sight Gauge with Ball Checks and Colored Density Sensitive Ball
  • ASME Code Stamp
  • API Nameplate

Optional Accessories
  • Interface Control
  • Water Slug Control Valve
  • 1 For Jet A, Jet A-1, Jet B, JP-4, JP-5, JP-8