Close
Skip To Content

Catalog

HV-XXXX225 Series
Horizontal Filter/Seperator Vessels for Fixed Installations at Military Facilities

Easier Cartridge Change
The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.

Effluent Cleanliness
A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.

Tested and Approved Vessels
Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This specifi cation is similar to API/IP 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.

Specifications
  • 225 psi ASME Code Construction
  • RF Flanged Connections
  • Swing Bolted Closure
  • Buna-N O-Ring Cover Seal
  • Mil-PRF-4556 Epoxy Coated Interior, Primed Exterior

Teflon® is a registered trademark of E.I. du Pont de Nemours & Co., Inc.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

Flow Rate

Coalescer Element

Separator Elements

Volume

Cover Shape

Flange Type

Sort by
N/A 300 gpm N/A I-638MMTB N/A SO-430V N/A 85 gal N/A Flat N/A Raised Face Flange
N/A 1200 gpm N/A I-656MMTB N/A SO-648V N/A 335 gal N/A Dome N/A Raised Face Flange
N/A 600 gpm N/A I-638MMTB N/A SO-636V N/A 140 gal N/A Dome N/A Raised Face Flange
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1