Search Catalog
GO
All Categories > Aviation Filters/Separators > Horizontal Filter/Separators > Item # HV-3456225  

Item # HV-3456225, Horizontal Filter/Separators


    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

HV-XXXX225 Series
Horizontal Filter/Seperator Vessels for Fixed Installations at Military Facilities

Easier Cartridge Change
The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.

Effluent Cleanliness
A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.

Tested and Approved Vessels
Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This specifi cation is similar to API/IP 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.

Specifications
  • 225 psi ASME Code Construction
  • RF Flanged Connections
  • Swing Bolted Closure
  • Buna-N O-Ring Cover Seal
  • Mil-PRF-4556 Epoxy Coated Interior, Primed Exterior

Teflon® is a registered trademark of E.I. du Pont de Nemours & Co., Inc.





Specifications  · Coalescer Elements  · Separator Elements  · Standard Accessories

Specifications

Flow Rate1

1200 gpm

Volume

335 gal

Weight

2100 lbs

Dimension A

65 3/8 in

Dimension B

37 3/4 in

Dimension C

22 in

Dimension D

83 1/2 in

Dimension E

19 7/16 in

Dimension F

8 in

Dimension G

28 in

Dimension H

38 1/4 in

Dimension J

34 in

Dimension K

94 1/2 in

Dimension L

38 1/2 in

Cover Shape

Dome

Flange Type

Raised Face Flange

Standard

ANSI B16-5, Class 150

Closure Type

Swing Bolted
1 For Jet A, Jet A-1, Jet B, JP-4, JP-5, JP-8


Coalescer Elements

Coalescer Element

I-656MMTB

Coalescer Elements (Qty)

10


Separator Elements

Separator Elements

SO-648V

Separator Elements (Qty)

3


Standard Accessories
In compliance with USAF Specification 15880, the following accessories are included for safe, effective operation:
  • Automatic Air Vent with Check Valve
  • Pressure Relief Valve (Does not meet Mil-V-11201)
  • Direct Reading Differential Pressure Gauge
  • Sampling Probes with Ball Valves
  • Stainless Steel Ball Valve Manual Drain
  • Sight Gauge with Ball Checks and Colored Density Sensitive Ball
  • ASME Code Stamp
  • API Nameplate

Optional Accessories
  • Interface Control
  • Water Slug Control Valve




Site created by ThomasNet Web Solutions