Close
Skip To Content

Catalog

  • VF 31E


    Clean Dry Fuels and Oils with High Performance

    These filter housings are versatile housings designed for use with several different high performance Aquacon® and other filter cartridges.

    Aquacon cartridges filter out water by chemically locking it into layers of super-absorbent media. Water capacity is as much as 11/2 quarts, depending on the specific vessel and cartridge. These cartridges also effectively filter out dirt, rust and other particulates. (See caution, back cover.)

    As an Aquacon cartridge reaches its water-holding limit, the media expands very rapidly and restricts the flow. The pressure drop will rapidly increase, signaling the need to change cartridges.

    The VF-61, with ACO series cartridges installed, has become the standard for low flow rate full flow aviation fuel monitor applications.

    • Wide variety of applications
    • Free and emulsified water to less than 5 ppm
    • 1/2 micron particulate removal
    • Provides protection against “slugs” of water
    • Pressure increase signals cartridge change
    Over Pressure Protection
    When exposed to a high concentration of water, the differential pressure across an absorbent cartridge (AC, ACO, AD, or ASL Series cartridges) will immediately increase. Pressure bypasses or other means to limit the inlet pressure to 75 psi (5 bar) should be installed to prevent cartridge from collapsing.

    Notes:
    • For aviation and diesel fuel applications, always install a differential pressure gauge or other means of determing differential pressure.
    • See Data Sheet for Absorbent cartridge (AC, AD) flow rates.
    • See Data Sheet for paper filter (FO) flow rates, synthetic filter (FOS) flow rates.

  • Vel Max Filter Vessel


    • Compact
    • Flexible Filtration
    • Multipurpose Design
    • Simplified Maintenance
    The compact Vel-Max Filter Vessel is suitable for flowrates up to 204 USGPM with micronic cartridges, up to 198 USGPM as a filter/separator, and up to 150 USGPM with CDF® monitor cartridges. The Vel-Max can be used on mobile refueling equipment, fueling cabinets and for fixed fueling installations. Vel-Max is designed for easy maintenance and easy conversion to a prefilter, filter/separator, or monitor.
    • Carbon steel construction
    • 250 psi design pressure
    • Epoxy powder coated interior & exterior
    • 2" NPT female inlet/outlet
    • 1/2 " NPT drain connection
    • 3/4" NPT vent and relief connection
    • 1/2" NPT sight glass connections
    • 1" NPT water probe connection
    • 1/8" NPT differential pressure gauge connections
    • Lid Gasket: G-2052 (Buna N)
    Caution
    Do not use Aquacon® or CDF® water absorbing monitor cartridges in pre-mixed jet fuel containing anti-icing additives.

  • VFD Series


    Vertical filter housings for use with DFO-6 & AD-6 Cartridges. Please download the supplied PDF file for detailed information.

  • V Series


    Vertical Filter-Coalescer/Separator Housings for use with DI/DSO Cartridges. Please download the supplied PDF for detailed information.